Litter Robot App Won T Reset. Wash with a wet rag and mild soap. Open the app and delete the current unit, even if it is offline.
To reset the cat sensor, the unit must be at the home position with a solid blue light displayed on the control panel. Open the app and delete the current unit, even if it is offline. Wash with a wet rag and mild soap.
Uninstall Then Reinstall The Whiskers App.
Press and hold cycle button for 5 seconds. Open the app and delete the current unit, even if it is offline. If you hit the button on the unit, it doesn't zero the gauge, but when you clear it in the app is does.
On Some Units, The Blue Light Will Flash Quickly (Press Reset Again If You Think.
That's always worked for me. Remove the globe and make sure there is nothing stuck on the base where the globe turns. The following are currently available:
The Reset Button Is So Named Because It Resets The Cat Sensor.
Check if your cat is still inside the globe and ensure you’ve filled the sand to the proper litter level. Check for an ios update. At this time, the unit will have reset itself.
The Globe Has No Electronic Components And Thus Exposing It To Water It Is Not A Concern.
If any litter remains in the robot, brush it away. Allow the wait time (3, 7, or 15 minutes. Litter robot connect general overview.
Wet Litter Can Turn Into A Clay That Is Hard To Remove.
For the app issue, i always just hit the reset button on the unit, then clear it in the app. You've activated the cat sensor to simulate your cat entering the globe, then exiting. The red light should come on now.
