How To Use Blink Camera Mount. Tighten the screws using a screwdriver. Go to home screen and click on add devices icon (plus icon).
Once done, it will prompt you with a tap sound. The wall mount opening (1) is located above the usb port at the rear of the camera. If you would like to order more, you may do so at amazon.com.
The Closer To The Glass, The Less Of A Reflection It Will Return.
The light should be a blinking blue light with a steady green light which should happen for about 30 seconds. The blink sync module is connected to wifi via the wireless router at 2.4ghz using 802.11 b/g/n. This must go over the black button used to.
The Two Provided Screws Are Wood Screws.
Once done, tap on the camera icon to use the live view feature of the camera. First, we need a way to use a blink camera outdoors and have it be highly portable so that when the temperature range is about to be exceeded, you can take the camera inside. Clip your camera to the mount, and then open up your blink app and launch the live view mode.
Place The Camera Under A Covering Or Awning To Prevent It From Suffering Elemental Exposure Or Water Damage.
Each camera connects to the blink sync module using lfr (low frequency radio). After mounting the camera to the wall or ceiling, you can rotate the. These come in a 3 pack and will work with indoor blink and xt cameras.
This Can Be Done By Flipping The Switch On The Back Of Each Camera.
The desktop/cieling mount opening (2) is at the bottom of the unit. Remember that the mounting screws provided will cause two holes in your wall. Once you see this your module is good to go.
The Room Where The Camera Resides Is Going To Need To Be Dark When Using The Camera.
Setting up blink sync module. Mounts from other blink cameras also fit the mini. First plug in the blink sync module and then go through the steps below.
